Search results for "mechanical behaviour"
showing 10 items of 16 documents
Discussion on “Experimental Deformation of Opalinus Clay at Elevated Temperature and Pressure Conditions: Mechanical Properties and the Influence of …
2021
AbstractThe testing procedure and results on saturated samples of Opalinus Clay in the work of Schuster et al. (Rock Mech Rock Eng https://doi.org/10.1007/s00603-021-02474-3, 2021) were conducted and presented using strain rates two to four orders of magnitudes higher than the rates needed to allow pore pressure equilibrium in the material, both in drained and undrained conditions. This leads to an erroneous estimation of the mechanical properties in saturated conditions. We discuss this aspect in the context of shale testing. We also discuss the effect of drying-induced fissuring on the mechanical properties of geomaterials tested in dry conditions.
A framework for modelling the biomechanical behaviour of the human liver during breathing in real time using machine learning
2017
Progress in biomechanical modelling of human soft tissue is the basis for the development of new clinical applications capable of improving the diagnosis and treatment of some diseases (e.g. cancer), as well as the surgical planning and guidance of some interventions. The finite element method (FEM) is one of the most popular techniques used to predict the deformation of the human soft tissue due to its high accuracy. However, FEM has an associated high computational cost, which makes it difficult its integration in real-time computer-aided surgery systems. An alternative for simulating the mechanical behaviour of human organs in real time comes from the use of machine learning (ML) techniq…
Analysis of the chemical and microstructural modifications effects on the hydro-mechanical behaviour of a lime-treated clay
2019
The paper presents the results of a characterization of kinetic characteristics of pozzolanic reaction with the aim to investigate the time-dependent modification of clay properties as a consequence of mixing with lime. Results of chemical analyses are in agreement with the increase of mechanical properties and with the observed microstructure modifications up to one year of curing time. The rate of development of pozzolanic reactions seems to be almost constant while the time required for their completion is dependent on the lime content. Pozzolanic products are responsible for the time reduction of swelling strain upon saturation as well as for the increases of yielding stress, stiffness …
Progress in the benchmark exercise for analyzing the lithiate breeder pebble bed thermo-mechanical behaviour
2006
The Helium Cooled Pebble Bed (HCPB) Blanket is one of the reference concepts for the European Breeding Blanket Programme for DEMO. In the reference blanket module, alternate layers of lithiated ceramics and beryllium pebbles act, respectively, as tritium breeder and neutron multiplier. The thermo-mechanical behaviour of both the pebble beds and their performances in reactor relevant conditions are also dependent on the pebble size and cell geometries (bed thickness, pebble packing factor, bed thermal conductivity). Therefore, in the EU Fusion Technology Programme, several out-of-pile experimental test campaigns have been performed to determine these behaviours. Theoretical calculations have…
Investigating the mechanical properties of GeSn nanowires.
2019
Germanium tin (GeSn) has been proposed as a promising material for electronic and optical applications due to the formation of a direct band-gap at a Sn content >7 at%. Furthermore, the ability to manipulate the properties of GeSn at the nanoscale will further permit the realisation of advanced mechanical devices. Here we report for the first time the mechanical properties of GeSn nanowires (7.1-9.7 at% Sn) and assess their suitability as nanoelectromechanical (NEM) switches. Electron microscopy analysis showed the nanowires to be single crystalline, with surfaces covered by a thin native amorphous oxide layer. Mechanical resonance and bending tests at different boundary conditions were use…
Taking advantage of the functional synergism between carbon nanotubes and graphene nanoplatelets to obtain polypropylene-based nanocomposites with en…
2020
Carbon Nanotubes (CNT) and Graphene Nanoplatelets (GNP) were incorporated in Polypropylene (PP) as single filler (CNT=1, 2 and 4 %wt. and GNP=2, 4, and 6 %wt.) and in hybrid form (CNT:GNP weight ratio 2:2, 2:4 and 4:2) using a prototype miniature Twin Screw Extruder (TSE) coupled with a double slit rheological die, in order to assess in-line the extent of nanofiller dispersion and to deliver PP-based nanocomposites with enhanced thermo-oxidative stability. The morphological, electrical and mechanical properties, as well as the resistance to thermal and photo degradation of the composites containing single nanofillers (PP/CNT and PP/GNP) were compared with those of hybrid PP based nanocompos…
Hydro-Mechanical Behaviour of a Sand-Bentonite Mixture for the Confinement of Nuclear Wastes
2019
The established concept for the protection of the biosphere from high-level nuclear wastes consists in the use of multi-barrier systems in deep geological repository, for which clayey geomaterials are key elements. Bentonite-based materials are selected as buffer and backfilling materials. Once in place, the barriers will be subjected to a series of severe loadings, including strong variations of suction (i.e. wetting and drying cycles). The paper presents selected results from a large ongoing research work to investigate the behaviour of bentonite-based materials in the context of nuclear waste disposal. In particular, the paper focuses on the response of a Sand/Bentonite mixture under dif…
An experimental and constitutive investigation on the chemo-mechanical behaviour of a clay. In Bio- and Chemo- Mechanical Processes in Geotechnical E…
2014
Engineering issues for which the understanding of the chemo-mechanical behaviour of soils is relevant include wellbore stability problems, the salinification of groundwater, and nuclear waste storage. However, despite the vast number of situations in which couplings between chemistry and mechanics occur, the available constitutive models rely on limited experimental evidence. This paper presents the results of an experimental programme on the chemo-mechanical behaviour of a non-swelling illite. The osmotic suction is controlled through the ion concentration of sodium chloride in the pore water. Stress paths include mechanical loading at a constant osmotic suction, and an increasing osmotic …
Microstructure and mechanical behaviour of a saturated compacted scaly clay
2011
The paper presents the results of a research on the influence of structure characteristics on the mechanical behaviour of a saturated compacted scaly clay. To this aim, mechanical properties of compacted scaly clay samples after saturation are compared with the corresponding properties measured on the clay reconstituted in the laboratory. For the stress range explored in the experimental programme, compacted scaly clay samples are stiffer and stronger than reconstituted clay samples owing to their greater density. Collected results are discussed taking in consideration microstructure characteristics of the compacted and reconstituted clay samples
Standard mechanical testing is inadequate for the mechanical characterisation of shape-memory alloys: Source of errors and a new corrective approach
2022
Thanks to its unique behaviour characterised by a superelastic response, Nitinol has now become the material of preference in a number of critical applications, especially in the area of medical implants. However, the reversible phase transformation producing its exceptional comportment is also responsible for a number of phenomena that make its mechanical characterisation particularly complex, by hindering the assumptions at the very basis of common uniaxial tensile testing. This necessarily reduces the level of safety and design optimization of current applications, which rely on incorrect mechanical parameters. In this study, the spurious effects introduced by the unconventional material…